FAQs
If the encrypted application is now tried to start, but the FAC of the Firm Code containing the license has a value of 0, error 38 is output and the start of the application is prevented.
What is the default password for CodeMeter? ›
Default username is “cmlcadmin” and password “CodeMeter”. 3. Navigate to "CodeMeter License Central | 4. Support" and tab "CmDust & Log Files".
What is a wibu CodeMeter? ›
CodeMeter is the universal software licensing and software protection technology for software publishers and intelligent device manufacturers, upon which all solutions from Wibu-Systems are built. CodeMeter combines the following applications: Software Protection.
How do I reset my CodeMeter? ›
Open the command line tool via "All Programs | CodeMeter | Tools | CodeMeter Command Prompt". 2. Enter the command: cmu32 --reset-access-data; under Linux and macOs via the command line: cmu --reset-access-data.
How do I fix error 38? ›
2 Answers
- Remove another messaging application like Truecaller, etc. Successfully solved SMSC (Short Message Service Center) error code 38.
- Try inputting *#*#4636#*#* in the dialer and a pop-up menu will open. Select phone option and it will show the SMSC block. Input the cellular company's SMSC number and click update.
What is error code 38 network out of order? ›
Cause 38 Network Out of order - This cause indicates that the network is not functioning correctly and that the condition is likely to last a relatively long period of time, e.g., immediately re-attempting the call is not likely to be successful.
How do I connect to a CodeMeter server? ›
- Open CodeMeter Control Center and click on the "WebAdmin" button at the bottom left. - Navigate in CodeMeter WebAdmin to "Settings| Server | Server Access". - Select the "Activate" option in the "Network server" area and confirm with "Apply". - Re-open CodeMeter Control Center.
Why do I have CodeMeter control center? ›
CodeMeter Control Center is software that serves to locally configure a license server for CodeMeter. By default, the license server is installed as a service and automatically starts when the computer starts. You must have CodeMeter Control Center on the following computers: computer where users use NAPA software.
What is the default username and password for CMS? ›
Local version: admin, password is empty (no password).
Is Wibu CodeMeter safe? ›
With a CodeMeter license, you have the software linked to a key that is kept in secure key storage. With the IP Protection mode, the software key is encrypted, but it is kept in the protected application.
The CodeMeter settings in the Windows registry are retained by default when uninstalling the CodeMeter Runtime under Windows.
How to update wibu CodeMeter runtime? ›
How to update the CodeMeter Runtime
- Open the CodeMeter Control Center from Run > All Programs > CodeMeter. ...
- Click on the Help menu and then on About.
- The version number will be shown on the About window. ...
- Run the Codemeter Runtime Installer following the prompts.
How do I get rid of CodeMeter? ›
How can I uninstall CodeMeter?
- Select the "Software" option in the Windows System control panel menu item. Note: If CodeMeter has been installed together with another software, CodeMeter is not displayed in "Control Panel | Software". ...
- Select the "CodeMeter Runtime Kit" item and the "Remove" option.
What is CodeMeter protection key? ›
The CodeMeter protection key (software or hardware-based) represents your license to use Archicad. You can use it to transfer the license from one machine to another.
How do I reset my master code? ›
Resetting your Combination Lock
- Open the lock using the previous combination. ...
- Insert the reset tool in the hole on the side of the lock. ...
- Push the reset tool in and turn 90° in either direction. ...
- Set wheels to your new combination.
- Turn and remove the reset tool. ...
- Record your combination in a safe place.
What is operating system error 38? ›
Error 38 indicates that the device was unable to register the certificate from the UMS Server(s).
What is error code 38 on motherboard? ›
(Code 38)” The driver could not be loaded because a previous instance is still loaded. Restart your computer. From Start, click Shut Down, and then select Restart.
What is error error code? ›
a number that appears on a computer screen to show that you have made a particular mistake or that something has gone wrong in a program: Error code 7 keeps coming up on my monitor. (Definition of error code from the Cambridge Business English Dictionary © Cambridge University Press)
What is error code 38 on 3ds? ›
Your SD card is set to read-only or is faulty. To fix, make sure the slider on the left side of the SD card is pushed up, use a different SD adapter if you are currently using one, and test the SD for errors if it is not read-only. If the error still happens, the SD card is likely faulty.